Xiaomi Door and Window Sensor 2
- Opening and closing and light sensor two in one, more interactive scenes.
- Opening and closing records, Mobile phone synchronous push*, Time out not closed reminder, New light sensor
- There are records of opening and closing
- Through the magnetic induction on the door and window sensor, judge the opening and closing state. After accessing the Bluetooth gateway, you can check the status of the device through the mobile phone anytime and anywhere
- Brand Xiaomi
- Name: Door & Window Sensor 2
- Size: 34*32.7*14.5mm
- Wireless Protocol: bluetooth 5.1
- Battery: CR2032(Built-in)
- Working Temperature: -10℃-50℃
- Working Humidity: 0%-95%RH
1. Tear off the protective film.
2. Try to align when installing.
3. The installation clearance is less than 18mm.
1. Open Mijia app and add equipment.
2. Scan the QR code of the product.
3. The connection is successful.
*Mobile phone synchronous push, abnormal status alert, access to the function of Mijia linkage Xiaomi AI speaker broadcast, need to be used with Bluetooth gateway or intelligent products with built-in Bluetooth gateway function.
*To realize the scene of opening the door and lighting at night, it is necessary to create an intelligent scene through Mijia app and use it with Bluetooth gateway or intelligent products with built-in Bluetooth gateway function.
*During installation, try to align the installation marks on the side of the main body and the magnet, and paste them in the required opening and closing areas (it is recommended that the sensor body be installed on the fixed surface of the opening and closing area, the magnet should be installed on the active surface of the opening and closing area, and the installation gap should be less than 18 mm when the doors and windows are closed)